Commercial 100v Amplifiers – Sound Productions Ltd

A-3612D

_WerkAdm1n — Sat, 18 May 2024 08:56:12 +0000

A-3600D Series Digital Mixer Amplifier provide maximum flexibility with up to seven inputs and up to 480 W of power. Browser based control and monitoring from anywhere reduces your time troubleshooting and adjusting systems. Feedback suppressor, input priorities, a sleek new appearance, and TOA’s legendary quality and reliability makes this a perfect fit for background and foreground music, paging, and noise masking applications. The A-3600D series is suited for broadcasting pagings or background music in retail shops, supermarkets, educational facilities, offices, houses of worship and factories. Crystal clear announcements and high sound quality, the A-3600D public address amplifier is equipped with 7 audio inputs, zone selctor for 2 zones, high and low impedance, broadcasting priority and emergency paging via control input. The digital technology makes this amplifier energy efficient, eco-friendly and cost-effective.- 120 W Class D amplifier

A-3512D

_WerkAdm1n — Sat, 18 May 2024 08:55:44 +0000

The A-3500D is a class D mixer amplifier with 120 watts output. It comes with emergency and priority paging, is equipped with 3 MIC/LINE inputs, 1 MIC input, 1 AUX input can be also used for music source. With 2-channel speaker zone selectors it is ideal for paging announcements and background music applications in retail shops, schools, offices and production facilities.- 120 W Class D mixer amplifier for high and low impedance speakers

A-2060DD

_WerkAdm1n — Sat, 18 May 2024 08:55:44 +0000

3 microphone inputs, 2 AUX input and 1 recording output DD-varieties with 2 phone jacks and 1 5-pin DIN input
D-varieties with 3 phone jacks
Speaker output of constant voltage distribution system (100 V)
Independent tone control of boost and cut type for both high and low frequency
MIC 1 with phantom power and mute function
Current limiter to prevent damage due to current overload
Excess heat limit to protect the transistor and power transformer
Available in 30 W, 60 W, 120 W and 240 W rated output

VM-2240

_WerkAdm1n — Sat, 18 May 2024 08:55:44 +0000

The VM-2240 is a multifunctional amplifier that can be mounted in an EIA-Standard equipment rack (3-unit size). The unit comes with 4 audio inputs including the background music input, and the speaker output section which has an internal attenuator and 5-zone selector. It permits not only general-purpose broadcast, but also Emergency Broadcast based on the EN60849 Standard which gives pre-recorded voice instructions (optional EV-200M is required) in the emergency situation. Broadcast can be made from an optional RM-200M Remote Microphone as well as from the amplifier, and can be remotely controlled from external equipment. In addition, for 100 V application the unit features the surveillance function (optional SV-200MA is required) which automatically checks the system for failures.

SMQ 1250

_WerkAdm1n — Sat, 18 May 2024 08:55:20 +0000

The SMQ series are quad-channel power amplifiers providing a new standard for affordable audio amplification in both fixed and mobile audio installations. Their advanced features and availability in different output powers for 350 Watt, 500 Watt, 750 Watt and 1250 Watt provide enormous flexibility for numerous applications. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Acoustics can be optimized using Butterworth, Bessel and Linkwitz-Riley filters with selectable roll-off which can be configured as Low / High & Band Pass and the 7-Band equalizer which has adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using a password or USB-key protection. Loudspeaker protection is provided by an output power limiter whereby the maximum output power for every channel (in Watt) can be configured. Configuration is made simple with loudspeaker presets and full system configurations which can be selected from a library and uploaded with a USB flash drive. This ensures the best acoustical performance with bullet-proof loudspeaker protection. A great input flexibility and source compatibility is provided by the input selection matrix in combination with the XLR and terminal block signal connections. The outputs are made using Speaker and Terminal block connections. System integration is made easy using the RS-232 control port. An optional Dante™ interface is available for the WaveDynamics™ amplifiers. The installation of this network interface allows receiving and sending of low latency, high-quality audio over a standard Ethernet network

MFA216

_WerkAdm1n — Sat, 18 May 2024 08:55:19 +0000

Compatible with AUDAC Touch 2
Dante expansion port
Advanced DSP and loudspeaker management
WaveDynamics speaker & set configurations
Compact design
Amplifier link in-& outputs
1 x SourceCon interface card slots
RS485 & TCP/IP controllable
Near-zero latency (100ms) when playing priority messages through Dante

MFA208

_WerkAdm1n — Sat, 18 May 2024 08:54:27 +0000

Compatible with AUDAC Touch 2
Dante expansion port
Advanced DSP and loudspeaker management
WaveDynamics speaker & set configurations
Compact design
1 x SourceCon interface card slots
RS485 & TCP/IP controllable
Near-zero latency (100ms) when playing priority messages through Dante

PMQ480

_WerkAdm1n — Sat, 18 May 2024 08:42:59 +0000

SYSTEM SPECIFICATIONS

RMS Power			4 x 480 W
Signal / Noise			> 95 dB
Crosstalk (@ 1 kHz)			> 70 dB
Technology			Class-D
Common mode rejection ratio			70 dB
Damping factor			> 200
Cooling			Temperature controlled FAN
Operating temperature			0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)		50 Hz – 20 kHz
Power	Supply		Switching mode
Inputs	Sensitivity (1W/1m)		-30 dB ~ +5 dB
	Impedance		10 kΩ balanced
Protection	Amplifier		DC Short circuit
			Over heating
			Over load
			Signal limiting
	Access		User & Administrator level (Through password and USB-key protection)
Inputs	Connector		XLR & 3-pin Euro Terminal Block (3.81 mm)
Outputs	Connector		4-pin Euro Terminal Block (Pitch – 5.08 mm)
Power	Supply	Operating	230 ~ 240 V AC / 50 ~ 60 Hz

PMQ600

_WerkAdm1n — Sat, 18 May 2024 08:42:59 +0000

SYSTEM SPECIFICATIONS

RMS Power			4 x 600 W
Signal / Noise			< 0.05 dB
Crosstalk (@ 1 kHz)			> 70 dB
Technology			Class-D
Common mode rejection ratio			70 dB
Damping factor			> 200
Cooling			Temperature controlled FAN
Operating temperature			0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)		50 Hz – 20 kHz
Power	Supply		Switching mode
Inputs	Sensitivity (1W/1m)		-30 dB ~ +5 dB
	Impedance		10 kΩ balanced
Protection	Amplifier		DC Short circuit
			Over heating
			Over load
			Signal limiting
	Access		User & Administrator level (Through password and USB-key protection)
Inputs	Connector		XLR & 3-pin Euro Terminal Block (3.81 mm)
Outputs	Connector		4-pin Euro Terminal Block (Pitch – 5.08 mm)
Power	Supply	Operating	230 ~ 240 V AC / 50 ~ 60 Hz

CAP248

_WerkAdm1n — Sat, 18 May 2024 08:42:38 +0000

SYSTEM SPECIFICATIONS

RMS Power		2 x 480 W
Signal / Noise		> 100 dB
THD+N (@ 1 kHz)		< 0.3% (1/2 Rated Power)
Crosstalk (@ 1 kHz)		< 80 dB
Technology		Class-D
Common mode rejection ratio		70 dB
Protection		DC Short circuit
		Over heating
		Over load
		Signal limiting
Cooling		Temperature controlled FAN
Operating temperature		0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)	50 Hz – 22 kHz
Power	Supply	Switching mode
	Source	230 ~ 240 V AC / 50 Hz
Inputs	Sensitivity (1W/1m)	-0.5 dB ~ 10.5 dB
	Impedance	10 kΩ balanced
	Connector	XLR female with Male Linkthrough
Outputs	Voltage / Impedance	100 V / 21 Ω
	Connector	4-pin Euro Terminal Block (Pitch – 5.08 mm)