Opus Technologies LD3.0
The Opus Technologies LD3.0 is next-generation perimeter magnetic loop amplifier. Continuous 10Arms output current capable and all necessary functionalities (AGC, MLC, etc) ensure rooms installation of 1000m².
The amplifier incorporates a fault synthesis that controls continuously the loop and the amplifier. The information is displayed on the front panel and can be deported thanks to a dry contact.
The LD3.0 can also be used in a low diaphonic phased loop system or an ultra high coverage system with a built-in 90° or 0° phase shift module (2 amplifiers). Solution used for the equipment of large rooms or adjoining rooms (hairpin systems).
The LD3.0 proven technology and quality of manufacturing allow us to offer a 5 years warranty.
Last modified: July 6th, 2024
by
by
| Coverage | 1000m² (20x45m) |
INPUT |
|
| Audio input | 3 differencial inputs: 2x line/microphone and 1X 100V |
| Connector type | Phoenix and/or Combo Neutrik |
| Phantom supply | 12V 2mA |
| Sensitivity | -50dB micro, +40dB 100V, -10dB line |
| Priority | 100V, input 1 |
POWER SUPPLY |
|
| Type | Integrated |
| Voltage | 115/230Vac (automatic) 50/60Hz |
| Power | 300VA |
| Idle consumption | 6W |
AUDIO CHARACTERISTICS |
|
| THD | <0,5% at 1Ω /1KHz / full current |
| Automatic Gain Control | AGC optimized for speech, dynamic > 36dB |
| Bandwidth | 80Hz to 9,5KHz |
OUTPUT |
|
| Loop impedance | 0,5Ω to 3Ω |
| Output voltage | 34Vrms (48Vpk) |
| Peak current | 15A |
| Peak current (at 1KHz) | 10Arms |
| Slave output | 0° or 90° phase shift |
FUNCTIONS |
|
| LED displays | Power, Protect, Clip and Correct Loop |
| Metal loss correction | Adjustable from 0 to 3dB/octave |
| Relay | NO/NC fault relay |
DIMENSIONS |
|
| HxLxD | 42 x 200 x 215mm |
| Weight | 1,3 kg |
