Opus Technologies LD1.2
The Opus Technologies LD1.2 is next-generation low-loss magnetic loop amplifiers witch incorporates two independent amplifiers out of phase.
%It provide an output current of 2x5Arms as well as a AGC to ensure optimum audio quality. The amplifier incorporate a fault synthesis that controls contiuously the loop and the amplifier. The information is displayed on the front panel and can be deported thanks to a dry contact.
It can equip adjoining rooms (amphitheater, courtroom, etc) with tow magnetic loops installed hairpin. This type of installation makes it possible to limit the external radiation of the magnetic field, to guarantee uniformity of coverage and to provide a power which makes it possible to limit the distortions due to the presence of metal.
The LD1.2 proven technologiy and quality of manufacturing allow us to offer a 5 years warranty.
by
| Coverage max: single loop | 600m² (15x40m) |
| Coverage max: multiloop | 400m² (10x30m) |
INPUT |
|
| Audio input | 3 differencial inputs: 2x line/microphone and 1X 100V |
| Connector type | Phoenix and/or Combo Neutrik |
| Phantom supply | 12V 2mA |
| Sensitivity | -50dB micro, +40dB 100V, -10dB line |
| Priority | 100V, input 1 |
POWER SUPPLY |
|
| Type | Integrated |
| Voltage | 115/230Vac (automatic) 50/60Hz |
| Power | 400VA |
| Idle consumption | 9W |
AUDIO CHARACTERISTICS |
|
| THD | <0,5% at 1Ω /1KHz / full current |
| Automatic Gain Control | AGC optimized for speech, dynamic > 36dB |
| Bandwidth | 80Hz to 9,5KHz |
| Phase change | Included |
| OUTPUT | |
| Loop impedance | 0,5Ω to 3Ω |
| Output voltage | 34Vrms (48Vpk) |
| Peak current (at 1KHz) | 2x5Arms |
| Peak current | 2x8A |
FUNCTIONS |
|
| LED displays | Power, Protect, Clip and Correct Loop |
| Metal loss correction | Adjustable from 0 to 3dB/octave |
| Relay | NO/NC fault relay |
DIMENSIONS |
|
| HxLxD | 42 x 200 x 215mm |
| Weight | 1,2 kg |
