Cloud Electronics Archives - Sound Productions Ltd

MA60Media Mixer/Amplifier

_WerkAdm1n — Sat, 18 May 2024 08:40:58 +0000

Four-input mixer-amplifier with integral 60w 4Ω mono power amplifier
Optional 70/100v Internal Transformer (CXL-50T)
Built-in digital music player supports .MP3 and .WMA files at all standard data rates/sample frequencies
Gain trims on all inputs
Electronically-balanced mic input
3.5 mm jack input (LINE 2) for MP3 player, laptop, etc.
Overall HF & LF EQ adjustment
Short-to-ground access connector or VOX-triggered paging on mic input
Selectable LINE 4 priority over other music inputs
Music Mute control input (NO or NC) for interface to emergency system
Compatible with standard Cloud remote controls – RL-1 (music level) and RSL-4 (music level and source selection)
Electronically-balanced pre-amp output
Transformer-isolated auxiliary output with independent mic and music level control - for use with telephone MOH systems
Aux output source selection (internal jumper) – fixed source or follow main output
Dimensions (mm) - 213.0 wide x 88 high (2U) x 278 deep (+ connectors & knobs)
Optional Rack Kits (RE-S & RE-L)

The post MA60Media Mixer/Amplifier appeared first on Sound Productions Ltd.

46-120T 4 Zone Integrated Mixer Amplifier

_WerkAdm1n — Sat, 18 May 2024 08:40:25 +0000

The 46-120T 4-Zone Integrated Mixer Amplifier provides individual source selection and volume control of up to six audio sources and two microphone inputs across four zones. Each zone is provided with 120W (4ohm) output or 120W (70/100V) output with internal transformer modules pre-installed. Source selection and volume level control for each zone can be made via the front panel or remotely with the connection of up to four optional RSL-6 / RSL-6A Remote Source / Volume Select controllers, one for each zone. Analogue paging functionality to individual or all zones is available with the optional PM-Series paging microphones. An automatic stand-by function reduces power consumption when not in use and a remote power down function makes the 46/120T suitable for numerous applications in retail, leisure, education and hospitality. The CDI-46 Optional Digital Interface Module provides digital paging connection via RJ-45, Ethernet Interface (TCP/IP) and RS-232 connection.

The post 46-120T 4 Zone Integrated Mixer Amplifier appeared first on Sound Productions Ltd.

46-120TMedia 4 Zone Integrated Mixer Amplifier

_WerkAdm1n — Sat, 18 May 2024 08:40:25 +0000

The 46-120T Media 4-Zone Integrated Mixer Amplifier provides individual source selection and volume control of up to six audio sources and two microphone inputs across four zones. Each zone is provided with 120W (4ohm) output or 120W (70/100V) output with internal transformer modules pre-installed. Source selection and volume level control for each zone can be made via the front panel or remotely with the connection of an optional RSL-6 / RSL-6A Remote Source / Volume Select controller. Analogue paging functionality to individual or all zones is available with the optional PM-Series paging microphones. The onboard Media-Player allows playback of MP3 / WMA content from an SD Card or USB Flash Drive, selectable in each of the four zones. An automatic stand-by function reduces power consumption when not in use and a remote power down function makes the 46/120T Media suitable for numerous applications in retail, leisure, education and hospitality. The CDI-46 Optional Digital Interface Module provides digital paging connection via RJ-45, Ethernet Interface (TCP/IP) and RS-232 connection.

The post 46-120TMedia 4 Zone Integrated Mixer Amplifier appeared first on Sound Productions Ltd.

MPA-240

_WerkAdm1n — Sat, 18 May 2024 08:28:36 +0000

6 line inputs, stereo inputs summed to mono
Line inputs via RCA phonos with input gain controls adjacent to connectors
Source select via front panel rotary selector or remote via RSL6
Line input level via front panel control or remotely via RL1 or RSL6
Line 6 priority selectable by internal jumper, release time 3s/6s/12s selectable by internal jumper
Music EQ by tamperproof LF and HF presets on rear panel
4 Mic inputs, low impedance balanced via phoenix style connectors
Microphone EQ by tamperpoof LF and HF presets on rear panel
100Hz High Pass dedicated filter on Mic inputs
Phantom power selected by internal jumper for each microphone.
Limiter dedicated to microphone inputs
Mic 1 has access triggered priority over Mics 2-4
All Mics have VOX priority over music signals, providing 30dB of attenuation
Integrated chime triggered by access control of Mic 1
Compatible with Bose EQ Series IIS EQ Cards
Remote Music Mute configurable for NO or NC operation
Overall "Peak Limiter" with LED indication on front panel

The post MPA-240 appeared first on Sound Productions Ltd.

CXV-425

_WerkAdm1n — Sat, 18 May 2024 08:27:49 +0000

With the increase of high quality 100v line loudspeaker solutions comes the need for high quality amplification. Traditionally this is achieved by the use of transformers with the associated problems of; limited frequency response, cost, saturation, size and weight. The transformer-less topology employed in the design of the CXV225 & CXV425 amplifers addresses all these problems, resulting in an amplifier that will deliver full frequency range and be the automatic choice for 100v line applications.

The post CXV-425 appeared first on Sound Productions Ltd.

MPA-60

_WerkAdm1n — Sat, 18 May 2024 08:27:49 +0000

6 line inputs, stereo inputs summed to mono
Line inputs via RCA phonos with input gain controls adjacent to connectors
Source select via front panel rotary selector or remote via RSL6
Line input level via front panel control or remotely via RL1 or RSL6
Line 6 priority selectable by internal jumper, release time 3s/6s/12s selectable by internal jumper
Music EQ by tamperproof LF and HF presets on rear panel
4 Mic inputs, low impedance balanced via phoenix style connectors
Microphone EQ by tamperpoof LF and HF presets on rear panel
100Hz High Pass dedicated filter on Mic inputs
Phantom power selected by internal jumper for each microphone
Limiter dedicated to microphone inputs
Mic 1 has access triggered priority over Mics 2-4
All Mics have VOX priority over music signals, providing 30dB of attenuation
Integrated chime triggered by access control of Mic 1
Compatible with Bose EQ Series IIS EQ Cards
Remote Music Mute configurable for NO or NC operation
Overall "Peak Limiter" with LED indication on front panel

The post MPA-60 appeared first on Sound Productions Ltd.

MA-60

_WerkAdm1n — Sat, 18 May 2024 08:27:49 +0000

Four-input mixer-amplifier with integral 60w, 4Ω mono power amplifier
Optional 70/100v Internal Transformer (CXL-60T)
Gain trims on all inputs
Electronically-balanced mic input
3.5 mm jack input (LINE 2) for MP3 player, laptop, etc
Overall HF & LF EQ adjustment
Short-to-ground access connector or VOX-triggered paging on mic input
Selectable LINE 4 priority over other music inputs
Music Mute control input (NO or NC) for interface to emergency system
Compatible with standard Cloud remotes – RL-1 (music level) and RSL-4 (music level and source selection)
Electronically-balanced pre-amp output
Transformer-isolated auxiliary output with independent mic and music level control - for use with telephone MOH systems
Aux output source selection (internal jumper) – fixed source or follow main output
Dimensions (mm) - 213.0 wide x 88 high (2U) x 278 deep (+ connectors & knobs)
Optional Rack Kits (RE-S & RE-L)

The post MA-60 appeared first on Sound Productions Ltd.

MPA-120MK2

_WerkAdm1n — Sat, 18 May 2024 08:27:49 +0000

Super compact design with very low power consumption
Six (unbalanced) stereo line inputs with individual sensitivity adjustment
Two balanced mic inputs – 12 V phantom power available on either or both• Separate HF/LF EQ adjustments for mic and music source
Paging control on Mic 1 input via short-to-ground access connection• Mic 1 configurable as high-voltage input for paging from existing 70/100 V-line system
Selectable VOX mic-over-music priority on all mic Inputs
Automatic Mic 1-over-Mic 2 priority in Page mode
Selectable LINE 6 priority with choice of release times
Selectable pre-announcement chime
Music Mute
Facility Port supports BT-1 Bluetooth and/or LM-2 Active Input Plates
Compatible with standard Cloud remotes RL-1 &RSL-6 Series
Power amplifier protection circuitry & input limiter
Transformerless output stage 70/100 V-line systems directly, or low impedance loudspeakers (4/8 ohms)
Aux output from pre-amp (balanced, line level)
Automatic power-down function (user-selectable)
ENERGY STAR Certification applied for
Convection cooled (MPA120MK2); forced-air cooling with variable speed control (MPA240MK2)
1U 19” rack mounting unit

The post MPA-120MK2 appeared first on Sound Productions Ltd.

CXV225

_WerkAdm1n — Sat, 18 May 2024 08:27:48 +0000

The post CXV225 appeared first on Sound Productions Ltd.