Audac – Sound Productions Ltd

SMQ 1250

_WerkAdm1n — Sat, 18 May 2024 08:55:20 +0000

The SMQ series are quad-channel power amplifiers providing a new standard for affordable audio amplification in both fixed and mobile audio installations. Their advanced features and availability in different output powers for 350 Watt, 500 Watt, 750 Watt and 1250 Watt provide enormous flexibility for numerous applications. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Acoustics can be optimized using Butterworth, Bessel and Linkwitz-Riley filters with selectable roll-off which can be configured as Low / High & Band Pass and the 7-Band equalizer which has adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using a password or USB-key protection. Loudspeaker protection is provided by an output power limiter whereby the maximum output power for every channel (in Watt) can be configured. Configuration is made simple with loudspeaker presets and full system configurations which can be selected from a library and uploaded with a USB flash drive. This ensures the best acoustical performance with bullet-proof loudspeaker protection. A great input flexibility and source compatibility is provided by the input selection matrix in combination with the XLR and terminal block signal connections. The outputs are made using Speaker and Terminal block connections. System integration is made easy using the RS-232 control port. An optional Dante™ interface is available for the WaveDynamics™ amplifiers. The installation of this network interface allows receiving and sending of low latency, high-quality audio over a standard Ethernet network

MFA216

_WerkAdm1n — Sat, 18 May 2024 08:55:19 +0000

Compatible with AUDAC Touch 2
Dante expansion port
Advanced DSP and loudspeaker management
WaveDynamics speaker & set configurations
Compact design
Amplifier link in-& outputs
1 x SourceCon interface card slots
RS485 & TCP/IP controllable
Near-zero latency (100ms) when playing priority messages through Dante

MFA208

_WerkAdm1n — Sat, 18 May 2024 08:54:27 +0000

Compatible with AUDAC Touch 2
Dante expansion port
Advanced DSP and loudspeaker management
WaveDynamics speaker & set configurations
Compact design
1 x SourceCon interface card slots
RS485 & TCP/IP controllable
Near-zero latency (100ms) when playing priority messages through Dante

PMQ480

_WerkAdm1n — Sat, 18 May 2024 08:42:59 +0000

SYSTEM SPECIFICATIONS

RMS Power			4 x 480 W
Signal / Noise			> 95 dB
Crosstalk (@ 1 kHz)			> 70 dB
Technology			Class-D
Common mode rejection ratio			70 dB
Damping factor			> 200
Cooling			Temperature controlled FAN
Operating temperature			0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)		50 Hz – 20 kHz
Power	Supply		Switching mode
Inputs	Sensitivity (1W/1m)		-30 dB ~ +5 dB
	Impedance		10 kΩ balanced
Protection	Amplifier		DC Short circuit
			Over heating
			Over load
			Signal limiting
	Access		User & Administrator level (Through password and USB-key protection)
Inputs	Connector		XLR & 3-pin Euro Terminal Block (3.81 mm)
Outputs	Connector		4-pin Euro Terminal Block (Pitch – 5.08 mm)
Power	Supply	Operating	230 ~ 240 V AC / 50 ~ 60 Hz

PMQ600

_WerkAdm1n — Sat, 18 May 2024 08:42:59 +0000

SYSTEM SPECIFICATIONS

RMS Power			4 x 600 W
Signal / Noise			< 0.05 dB
Crosstalk (@ 1 kHz)			> 70 dB
Technology			Class-D
Common mode rejection ratio			70 dB
Damping factor			> 200
Cooling			Temperature controlled FAN
Operating temperature			0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)		50 Hz – 20 kHz
Power	Supply		Switching mode
Inputs	Sensitivity (1W/1m)		-30 dB ~ +5 dB
	Impedance		10 kΩ balanced
Protection	Amplifier		DC Short circuit
			Over heating
			Over load
			Signal limiting
	Access		User & Administrator level (Through password and USB-key protection)
Inputs	Connector		XLR & 3-pin Euro Terminal Block (3.81 mm)
Outputs	Connector		4-pin Euro Terminal Block (Pitch – 5.08 mm)
Power	Supply	Operating	230 ~ 240 V AC / 50 ~ 60 Hz

COM24

_WerkAdm1n — Sat, 18 May 2024 08:42:38 +0000

SYSTEM SPECIFICATIONS

RMS Power			240 W
Signal / Noise			> 90 dB
THD+N (@ 1 kHz)			< 0.5%
Crosstalk (@ 1 kHz)			> 70 dB
Technology			Class-D
Common mode rejection ratio			70 dB
Protection			DC Short circuit
			Over heating
			Over load
			Signal limiting
Cooling			Convection cooled
Operating temperature			0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)		20 Hz – 20 kHz
Power	Supply		Transformer
	Source		230 ~ 240 V AC / 50 ~ 60 Hz
Inputs	Other		Remote mic (Priority mic + chime)
			Tele-paging (Priority line)
			Priority mute contact
Outputs	Connector		2-pin Euro Terminal Block (Pitch – 5.08 mm)
			10-pin Euro Terminal Block (Pitch – 5.08 mm)
	Voltage / Impedance		100 V / 4 Ω
Inputs	Balanced Microphone 1 – 4	Type	4 x Balanced Mic./Line (-6 dB / -50 dB)
		Connector	2 x XLR/Jack Combo & 2 x XLR
		Other	4 x 15 V DC Phantom & 2 x Priority
	Balanced Microphone 5	Type	1 x Balanced Mic./Line (-6 dB / -50 dB)
		Connector	6.3 mm Jack
	Unbalanced Stereo	Type	1 x Stereo Unbalanced Line (+14 dB / -30 dB)
		Connector	RCA

CAP248

_WerkAdm1n — Sat, 18 May 2024 08:42:38 +0000

SYSTEM SPECIFICATIONS

RMS Power		2 x 480 W
Signal / Noise		> 100 dB
THD+N (@ 1 kHz)		< 0.3% (1/2 Rated Power)
Crosstalk (@ 1 kHz)		< 80 dB
Technology		Class-D
Common mode rejection ratio		70 dB
Protection		DC Short circuit
		Over heating
		Over load
		Signal limiting
Cooling		Temperature controlled FAN
Operating temperature		0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)	50 Hz – 22 kHz
Power	Supply	Switching mode
	Source	230 ~ 240 V AC / 50 Hz
Inputs	Sensitivity (1W/1m)	-0.5 dB ~ 10.5 dB
	Impedance	10 kΩ balanced
	Connector	XLR female with Male Linkthrough
Outputs	Voltage / Impedance	100 V / 21 Ω
	Connector	4-pin Euro Terminal Block (Pitch – 5.08 mm)

COM104

_WerkAdm1n — Sat, 18 May 2024 08:42:38 +0000

SYSTEM SPECIFICATIONS

Signal / Noise			> 90 dB
THD+N (@ 1 kHz)			< 0.5% (1/2 Rated Power)
Crosstalk (@ 1 kHz)			> 70 dB
Technology			Class-D
Inputs			Priority mute contact
Cooling			Convection cooled
Operating temperature			0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)		20 Hz – 20 kHz
Power	Supply		Switching mode
Outputs	Connector		4-pin Euro Terminal Block (Pitch – 5.08 mm)
	Voltage / Impedance		100/ 70 V / 4 Ω
Protection	Amplifier		DC Short circuit
			Over heating
			Over load
			Signal limiting
Inputs	Balanced Microphone	Sensitivity (1W/1m)	-0 dB ~ +50 dB
		Connector	3-pin Euro Terminal Block (Pitch – 3.81 mm)
		Type	1 x Balanced Microphone
	Unbalanced Stereo	Type	1 x Stereo Unbalanced Line
		Connector	RCA / 3.5 mm Jack
		Sensitivity (1W/1m)	-4 dB ~ +20 dB
Power	Supply	Operating	100 ~ 240 V AC / 50 ~ 60 Hz
Inputs	Balanced Microphone	Phantom Power	15 V DC
RMS Power	@ 4 Ω		1 x 40 W

COM108

_WerkAdm1n — Sat, 18 May 2024 08:42:38 +0000

SYSTEM SPECIFICATIONS

Signal / Noise			> 90 dB
THD+N (@ 1 kHz)			< 0.5% (1/2 Rated Power)
Crosstalk (@ 1 kHz)			> 70 dB
Technology			Class-D
Inputs			Priority mute contact
Cooling			Convection cooled
Operating temperature			0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)		20 Hz – 20 kHz
Power	Supply		Switching mode
Outputs	Connector		4-pin Euro Terminal Block (Pitch – 5.08 mm)
	Voltage / Impedance		100/ 70 V / 4 Ω
Protection	Amplifier		DC Short circuit
			Over heating
			Signal limiting
Inputs	Balanced Microphone	Sensitivity (1W/1m)	-0 dB ~ +50 dB
		Connector	3-pin Euro Terminal Block (Pitch – 3.81 mm)
		Type	1 x Balanced Microphone
	Unbalanced Stereo	Connector	RCA / 3.5 mm Jack
		Sensitivity (1W/1m)	-4 dB ~ 20 dB
Power	Supply	Operating	100 ~ 240 V AC / 50 ~ 60 Hz
Inputs	Balanced Microphone	Phantom Power	15 V DC
RMS Power	@ 4 Ω		1 x 80 W

PMQ240

_WerkAdm1n — Sat, 18 May 2024 08:42:38 +0000

SYSTEM SPECIFICATIONS

RMS Power			4 x 240 W
Signal / Noise			> 95 dB
THD+N (@ 1 kHz)			< 0.05% (1/2 Rated Power)
Crosstalk (@ 1 kHz)			> 70 dB
Technology			Class-D
Common mode rejection ratio			70 dB
Damping factor			> 200
Cooling			Temperature controlled FAN
Operating temperature			0° ~ 40° @ 95% Humidity
Frequency	Response (± 3 dB)		50 Hz – 20 kHz
Power	Supply		Switching mode
Inputs	Sensitivity (1W/1m)		-30 dB ~ +5 dB
	Impedance		10 kΩ balanced
Protection	Amplifier		DC Short circuit
			Over heating
			Over load
			Signal limiting
	Access		User & Administrator level (Through password and USB-key protection)
Inputs	Connector		XLR & 3-pin Euro Terminal Block (3.81 mm)
Outputs	Connector		4-pin Euro Terminal Block (Pitch – 5.08 mm)
Power	Supply	Operating	230 ~ 240 V AC / 50 ~ 60 Hz